|
Steps: |
| 1. |
Make sure you have thoroughly washed
and dried your car prior to polishing. |
| |
| 2. |
Apply swirl remover/polish/glaze
around the edge of the pad. |
| 3. |
Take the polisher and smear the
product into the section you are going to work
while the polisher is off. This will totally
eliminate splatter. |
| |
| 4. |
Turn the machine on, and work the
product in @ speed 2 or 3. |
| |
| 5. |
Go in up and down and then back and
forth overlapping motions. |
| |
| 6. |
When the polish starts to dry, up
the speed to 4-4.5 and buff off as much as you
can. The shine should start to come thru. |
| |
| 7. |
Use Microfiber towel to remove any
remaining residue. Do each section as many times
as you have to until the swirls are gone.
Remember! Your final result will only be as good
as your prep. Once complete, apply a quality wax
or sealant of your choice to protect the finish. |
